Introduction of item
Jinwoong Airsys loves nature that breathes with people.
Damper
Damper is a valve or plate that stops or regulates airflow inside a duct, chimney, VAV box, air handler, or other air handling equipment.
Damper can be used to block central air conditioners (heating or cooling) in rooms that are not in use, or to adjust for room temperature and room temperature control.
Volume Damper
Volume Damper
Product Information
It is a damper with an air volume control handle (Hende) attached. It is divided into R Type (round) and S Type (square) according to its appearance, and there are various products depending on whether or not there is a flange and the number of wings.
Material
- Hot-dip galvanized steel sheet (GI/CGI)
- Stainless steel (STS 304)
Product standard
Order
For products other than the above specifications, please contact us.
Motor Volume Damper
Motor Volume Damper
Product Information
It is a damper with a motor for adjusting the air volume and is divided into R Type (circular) and S Type (square) according to its appearance.
Material
- Hot-dip galvanized steel sheet (GI/CGI)
- Stainless steel (STS 304)
Product standard
For products other than the above specifications, please contact us.
Fire Damper
Fire Damper
Product Information
It is a damper with a 72℃ fuse and can be changed to 103℃ and 280℃. It is divided into R Type (circular) and S Type (square) according to its appearance, and the connection part has a flange method and a sleeve method.
Material
- Hot-dip galvanized steel sheet (GI/CGI)
- Stainless steel (STS 304)
Product standard
For products other than the above specifications, please contact us.
Fire Volume Damper
Fire Volume Damper
Product Information
It is a damper with built-in air volume control handle (Hendle) and fuse, which operates as an air volume control damper in normal times, but closes the fan by a fuse in case of fire. ).
Material
- Hot-dip galvanized steel sheet (GI/CGI)
- Stainless steel (STS 304)
Product standard
For products other than the above specifications, please contact us.
FVD handle
․Circular: Attached in the form of removing the pieces of the lower part
․Square: Attached by combining the pieces of the lower part
․Air volume: The control scale is displayed in eight quartiles, and the air volume can be adjusted as desired.
Piston Releasor Damper
Piston Releasor Damper
Product Information
As a damper with a piston releaser attached, it is divided into R Type (round) and S Type (square) depending on the exterior.
- The Haron system is activated by the operation of a detector or a manual control box.
- When the gas discharged from the Cylindler is discharged to the Halon Headll along the copper pipe, it passes through Check Valve a and flows into the Releason.
- Pistonol of Peleasor is pushed and tasted by the pressure The damper shaft Gear2 is rotated.
- After the situation is over, open the Manual Valve 5 in the manual control box to restore the damper automatically.
Material
- Hot-dip galvanized steel sheet (GI/CGI)
- Stainless steel (STS 304)
Product standard
For products other than the above specifications, please contact us.
Back Draft Damper
Back Draft Damper
Product Information
It is a damper that opens and closes automatically by indoor pressure and is divided into R Type (round) and S Type (square).
Material
- Hot-dip galvanized steel sheet (GI/CGI)
- Stainless steel (STS 304)
Product standard
For products other than the above specifications, please contact us.
Phenolic Duct Damper
Phenolic Duct Damper
Product Information
It is a damper for finolic ducts, and the external shape is S Type (square) and is manufactured 5~10mm smaller than the order standard.
Material
- Hot-dip galvanized steel sheet (GI/CGI)
- Stainless steel (STS 304)
Product standard
For products other than the above specifications, please contact us.
VD Handle
- VD Handle
For general square and round
․ General handle attached to square VD
․ General handle attached to a circular MD of 1400mm or more
․ The air volume control scale is in the 8th quartile
For general round
․ General handle attached to round VD of ∮350mm or less
․ The air volume control scale is displayed in eight quartiles, and the air volume can be adjusted as desired.
For flat and convex square and round
․ Flat-convex handle attached to square and round VD
․ It is a product with a short handle, and the air volume can be adjusted only up to 7 minutes.
One-touch type for square and round
․ One-touch handle attached to square and round VD
․ It is a product with a short handle, and the air volume can be adjusted only up to 7 minutes.
